PITCH SKALA HOBBY

FF-10+R6014 2,4GHZ
[51-FUT7032]

~~4.995,00DKK~~ 4.195,00DKK

Klik for større billede

Fully expanded ten-channel computer system of superior quality, with 2.4 GHz FASST technology. The FASST system is a Spread Spectrum system with frequency hopping (FHSS), and is therefore permitted to transmit a maximum power of 100 mW EIRP. This gives it adequate reserves even for large-scale model aircraft and jets.

No crystals, no spot frequency selection, maximum security from same-channel interference.

Virtually interference-free due to Spread Spectrum modulation, frequency hopping and encoding from transmitter to receiver using more than 130 million codes.

Please see the FASST introduction page for a detailed description of the advantages of 2.4 GHz FASST technology.

Focal point of the transmitter is the large, high-resolution 160 x 72 dot graphic screen with extra-large dots for good legibility. All settings are entered and displayed using the screen itself. The system is very simple to program using the four control buttons, the 3-D hotkey and the graphical user interface.

New precision dual-axis stick units with digital trims and variable trim increments eliminate the need to make trim adjustments or store trim values when you switch model memories. The trim values are displayed on the LCD screen in bar graph form.

The side-mounted rotary controls provide a practical means of operating supplementary functions without letting go of the primary sticks.

The transmitter is fully expanded as standard, with five analogue rotary controls and eight switches; no additional accessories are required. The switches and other transmitter controls can be assigned to virtually any function.

New feature: logical switch function for switches and sticks.

Comprehensive software provides all the essential facilities even for power models, gliders and helicopters with extensive functions.

Plenty of freely programmable mixers are available with up to 5-point curves for setting up very complex mixer functions.

The transmitter can also operate in FM or PCM transmission mode; the FM-TW 10 RF module is required for this. It is then compatible with all current FM and PCM-1024 receivers in the robbe/Futaba range.

In FASST 2.4 GHz mode the system offers a total of ten channels (eight proportional, two switched channels).
The software is available in six languages: German, English, French, Italian, Spanish and Dutch.

Integral H3 (1:1:1) swashplate mixer for CCPM rotor head control (140°), plus H4X for 45° swashplate rotation.

Integral Trainer system with individual function transfer.

With charge socket, i.e. prepared for use with rechargeable batteries.

The stick units are designed for Universal mode, and can be converted by the user from "throttle right" to "throttle left".

Fifteen internal model memories, with infinite expansion using CAMPac modules:
4k CAMPac module = 1 model
16k CAMPac module = 4 models
64k CAMPac module = 16 models
16 x 64k CAMPac module = 256 models

Vælg antal:

Oprettet fredag 31 juli, 2009.

Vi anbefaler også :

Batteri Sanyo 9,6V, 2700mAh, TX, Firkantet, NI-MH
299,00DKK